Electromagnetic Suspension-Overband Separators

• EMA models are electromagnetic and make very powerful attraction force on the conveyor band (900-1000 Gauss).
• EMA model electromagnetic separators hold Magnetic materials (nuts, bolts, wire, nails, keys, hammer etc..) that get mixed into the raw material and products over the conveyor band.
• Magnetic materials that are picked up below the separators are cleaned by shutting down its electricity.
• EMA model separators are delivered with an electric panel that contains transformator-redressor group.
• EMA model separators are generally used in Soil Industry, Fertilizer Industry, Glass Industry, Sugar Industry, Food Industry and so on.
• Electromagnetic Suspension Separators should be preferred if the material depth is over 150 mm and the distance between the separator and conveyor band is over 200 mm.

Electromagnetic Suspension-Overband Separators

With Self Cleaning Band

• EMB model electromagnetic band separators mostly hold the Magnetic materials among the products on the conveyor and separate them out automatically with the help of their bands.
• EMB model electromagnetic band separators are the heavy duty types that are widely used in casting factories, soil industry, iron-steel industry ,glass industry etc…
• If the material depth is over 150 mm and the distance between the conveyor and the base is over 200 mm electromagnetic band separators should preferred.

Electromagnetic Plate Separators

• Electromagnetic Plate Separator is a kind of separator that our company has created. It’s ideal for both liquid and dust materials.
• For best results the material should be well spread over the separator.
• Electromagnetic plate separator has high Magnetic field. Therefore the Magnetic materials that are hard to hold in the flowing material can bu caught easily. Also it is easy to clean the separator.
• Electromagnetic plate separator is installed with 60-80 degree slope depending on the material. While materials flow over the electromagnetic plate separator the pieces with Magnetic features are held by the holding edge and are collected in the whirlpool below the holding edges.
•  In case of the electrical black outs and break downs, the lid does not open and release the collected pieces back to the product automatically. The collected pieces are emptied into the box behind.
• Usage Areas : It is widely used in ceramic industry, glass industry, chemical industry, food industry etc…

 Electromagnetic Drum-Pulley Separators

    Electromagnetic Drum Separators

                The standart Electromagnetic Drum Separator is produced in diameters of 450-500 mm. Electromagnetic Drum Separators are generally installed below the silo with the help of the feeder. It is also possible to feed with elevator or conveyor bands.

It automatically cleans the free iron dust and pieces that are in the material. It is ideal for the materials over 300 micron which do not stick to the surface of the drum. For the best results the materials should be well spread over the surface of the separator.

Usage Areas : The cleaning of iron dust in the brass filings, glass industry, soda industry etc…

Electromagnetic Drum Separator

 Electromagnetic Pulley Separators

The Pulley Separators are both used as the incite of the conveyor and to seperate magnetic pieces in the material. The pieces that can be seperated ; wire, nail, bolts, nuts, hammer, keys, electrod pieces, machine pieces and free irons etc…